For more than twenty one years FAST Shelter has been manufacturing shelters for use in the Automotive Refinishing field as well as many different industrial applications. Through customer feedback and independent research we have continually made adjustments and improvements to our product line.

FAST Shelter is made to be used on macadam, concrete, stone, sand, grass, or any other surface. If you can drive on it, you can place a FAST Shelter on it.
Who needs a FAST Shelter?
Anyone who works outside and requires a temporary portable inflatable tent or workstation to protect their work, their tools, or themselves from the elements. Possible users include:
- portable paint booth
- auto tune up and oil change
- auto detailing
- snow mobile repair
- motorcycle repair
- boat repair
- construction covers
- emergency site shelter
- sporting event registration
- public event shelter
- and many more!
Why buy a FAST Shelter?
More productive
By using a FAST Shelter portable workstation, days normally lost to wind, rain, cold and sun are changed to profitable ones. The rapid set up and take down means FAST Shelter doesn’t add to your work load, only to your bottom line.
More profitable
Many of our customers report earning 25% more each week simply because they have a controlled environment to work in. No more overspray on nearby vehicles, no more dusty paint jobs, no more wet interiors or ruined equipment because of a sudden shower. But most of all, no more short work week because of weather.
More professional
Face it, you’re in the appearance market. FAST Shelter makes you look as good as your work really is. Your customer will appreciate your professionalism, and that will result in additional sales. The “wow” factor is real and it sets you apart from your competitors.
Why an INFLATABLE shelter?
EASY SET UP
By using air for support, set up time is rapid and there is no need for cumbersome poles or damaging ground stakes. Five minutes is all it takes for an experienced person to set up a shelter.
PORTABLE
Shelter packs up into either a heavy duty canvas bag or hard-side container. Everything except the blower in one spot.
Below is our current selection of models for the Industrial market.
Sizes / Pricing
FAST Shelter inflatable structurePositive Filtration SystemWindows and pre-filters in one door endVan/Trailer Connector on one endZipper in floor
450 | $2755.00 |
---|---|
inside dimension: | 10 ft wide, 10 ft long, 8 ft tall |
door opening height: | 8 ft, deflated tent: 2 ft in diameter, 105 lbs including blower |
550 | $3365.00 |
---|---|
inside dimension: | 10 ft wide, 14 ft long, 8 ft tall |
door opening height: | 8 ft, deflated tent: 2 1/2 ft in diameter, 105 lbs |
650 | $3960.00 |
---|---|
inside dimension: | 10 ft wide, 20 ft long, 8 ft tall |
door opening height: | 8 ft, deflated tent is 3 ft in diameter, 120 lbs |
650XT | $4270.00 |
---|---|
inside dimension: | 10 ft wide, 20 ft long, 9 1/2 ft tall |
door opening height: | 9 ft, deflated tent is 3 ft diameter, 130 lbs |
750 | $4110.00 |
---|---|
inside dimension: | 12 ft wide, 20 ft long, 8 ft tall |
door opening height: | 8 ft, deflated tent: 3 ft in diameter, 135 lbs |
750XT | $4605.00 |
---|---|
inside dimension: | 12 ft wide, 20 ft long, 9 1/s ft tall |
door opening height: | 8 ft, deflated tent: 3 ft in diameter, 140 lbs |
850 | $4330.00 |
---|---|
inside dimension: | 16 ft wide, 20 ft long, 8 ft tall |
door opening height: | 8 ft, deflated tent is 3 ft in diameter, 155 lbs |
850XT | $4760.00 |
---|---|
inside dimension: | 16 ft wide, 20 ft long, 9 1/2 ft tall |
door opening height: | 9 ft, deflated tent is 3 ½ ft diameter, 160 lbs |
950 | $5675.00 |
---|---|
inside dimension: | 16 ft wide, 25 ft long, 8 ft tall |
door opening height: | 8 ft, deflated tent: 3 1/2 ft in diameter, 170 lbs |
950XT | $6560.00 |
---|---|
inside dimension: | 16 ft wide, 25 ft long, 9 1/2 ft tall |
door opening height: | 8 ft, deflated tent: 3 1/2 ft in diameter, 195 lbs |

Standard Specifications

1. Inflated Framework
2. Shelter Cover
3. Drape Door
4. Base Tubes5. Pre-filters / Windows
Shelter
- Framework: 8oz vinyl coated nylon, waterproof, UV inhibited and Flame Retardant Double stitched seams using #69 bonded polyester thread with glue reinforcement where necessary
- Base: 14 oz vinyl coated nylon, waterproof and Flame Retardant
- Cover: 8oz vinyl coated nylon, waterproof, UV inhibited and Flame Retardant Pieces of cover are heat welded together
- Floor: 10 oz vinyl coated nylon, waterproof
- Fabric has Flame retardant rating (FR rated) under the following codes: FAR 25.853 PARA B; CCCT 191 METHOD 5902;
NFPA 701 LARGE SCALE; CPAI – 84.
Inflation Blower
- 450: 1/4HP Internal blower; 2.3 amps; 375cfm
- 550, 650, 750, 850, 950: 1HP External blower; 6.9amps with back pressure; 850cfm
Additional Components
- Two drape doors
- Two park-on patches
- Internal cross straps
- Eight tie-down straps
- One utility duct port in cover to allow for filtration/heat/AC access
- D-rings inside shelter for accessory attachment
- External top cover banner tabs
- One Heavy duty vinyl pack up bag
- One repair kit
- One instruction manual
Custom
We’ve made them smaller, larger and everywhere in between.
If you feel like one of the above sizes isn’t quite right, please give a call or send an email and let us know exactly what you are looking for.
Options / Accessories – Auto / Ind
AIR CONDITIONING
C15
15K BTU cooling
For 450 & 550
120V – 12 Amps
Includes supply and return ducting, remote thermostat
$4395.00
C42
42K BTU Cooling
For 650 and larger
220V – single phase
Includes supply and return ducting, remote thermostat
$6545.00



POSITIVE FILTRATION SYSTEM
$950.00 12″ blower
We offer a filtered ventilation system to help change the air in the shelter work area. The ventilation system consists of three main parts: The intake hose with filter, the turbine style fan and the exhaust tube which exits over the top of the shelter. Measured air flow through the filter is 500 cu ft per minute. The filter is from Paint Pockets™ and has been certified to filter out 99.84% of particles down to the 10 micron size.
Replacement filters are $35.00 each
- 120 V
- 3 Amp
- 22 lbs




EASY BREEZE Air Mover
12″ Fan $715.00
The fan is located outside the shelter and is connected to fabric ductwork that enters the side fo the shelter and then runs the length of the shelter hugging the top. the ductwork has exhaust holes every 20″ to allow the ducted air to circulate throughout the shelter.
A heater or cooler can be attached to the systems fan.
The ductwork fabric is both FR and UV rated.
12″ System – recommended for Shelters 10′ x 20′ and larger has a sealed 120V motor which draws 4 amps and moves 2000 cu ft per minute
BANNERS
Starting at $165.00
On the shelter, banner tabs are on both sides as a standard feature.
LOGOS or lettering can be placed on the sides of the shelter to advertise your business. Why not make this both a work station and billboard for your business at the same time?
Any text can be used. Banners are removable. Text is hand painted or appliqued. Complicated logos are digitally printed. We can recreate any design in any color.



Ground Stakes $160.00
Set of four (4) 1″ x 30″ steel ground stakes

VAN CONNECTOR
FREE when ordered at time of purchase
The Van Connector allows your FAST Shelter to attach directly to your trailer or van so that there is a covered transit between your supplies and your work area.

HEATER $3595.00
Pelsue Model 45k BTU 1590 one-piece Axial Propane Heater / Blower provides fresh, warm air. Indirect fired. Propane tank not included.
- 120 V
- 4 Amp
- 47 lbs

HEATER $2495.00
Flagro 85k BTU Propane Heater / Blower provides fresh, warm air.
Direct fired. Propane tank not included.
- 120 V
- 15 Amp
- 135 lbs

Cooldraft Misting Fan $825.00
Cooldraft M1-360
18″ High Velocity fan with four positions and three speeds
Designed to cool 400-600 sq ft
Water required for operation
- 110 V
- 3.4 Amp
- 34 lbs
- 33″ H x 24″W x 18″D with fan in cooler
SIDE ACCESS $850.00
Provides easy access to the shelter from the side. Park your van next to the shelter and work right from your van’s side doors. Putting your van on the side of the shelter is often the best use of the space you have to work.
See how the van doors are open and the side of the shelter is over a van? The top of the side access is covered. Entry size is approximately 30 inches wide by 86 inches tall. A door cover is included to close the opening when not in use.



WINDOWS
$225.00 per end
Windows can be added to the doors to provide more light to your work area.
Modifications to the standard designs of our inflatable shelters are not a problem because we are the manufacturer. There may be an additional charge.
We will work with you so that you have the FAST Shelter that works best for your business. Just call and talk to us about your needs.
Portable Paint Booth Photos
Model 450



Model 550



Model 650 & 650XT






Model 750 & 750XT



Model 850 & 850XT



Model 950 & 950XT






Model 950 & 950XT



















Set Up / Take Down – Portable Paint Booth
Make sure there is enough room for your FAST Shelter inflatable tent before you take it from your work van or pickup truck. Walk off about 30 feet in one direction and 15 feet in the other. And if it is a windy location, be sure to leave room to park a vehicle on the attached pads for better stability.
Call or email us with any questions.

FAST Shelter comes in a heavy duty viny bag with tie up straps. Undo the straps, flip the bag on its side and roll out the shelter. Any flat surface will do.

Locate the two end doors and drag the shelter to face the way you want. Spread the shelter out flat so that the bottom black tubes are pulled tightly opposite each other. It is a little easier to do with two people, but one can handle it.

Place the blower by the blower tube and attach the tube.
Plug in the electric cord and turn on the blower. FAST Shelter will begin to inflate.

FAST Shelter inflates by itself. It is the tubes that inflate, not the whole structure.
You are ready to work!



Once inflated the shelter will need to be secured. Check out Anchoring Your Shelter for the best ways to secure your shelter.