When the need arises for a FAST Shelter in a location where 110volt ac power is not readily available our AirTite series is the ideal solution.
AirTite shelters are designed to be inflated with a high pressure pump or air bottle. Once inflated, they will remain that way, without additional filling, for several days eliminating the need for a constant source of electrical power.
Sizes / Pricing
Below is our current selection of models of AirTite Shelters
10 ft Wide
20 ft Long
8 ft Tall
- Framework: Grey 1100 dtex fabric
- Cover: 8oz vinyl coated nylon, waterproof and UV inhibited
- Electric inflatation / deflation fan
- Air bottle hose kit
- Two drape doors
- Two windows in shelter cover
- Eight tie-down straps
- Two utility duct ports in cover to allow for filtration/heat/AC access
- D-rings inside shelter for accessory attachment
- External top cover banner tabs
- One heavy duty vinyl pack up bag
- One repair kit
- One instruction manual
- One year warranty
Options / Accessories – AirTite
15K BTU coolingFor AT1015120V – 12 AmpsIncludes supply and return ducting, remote thermostat
42K BTU CoolingFor AT1020 and larger
220V – single phase
Includes supply and return ducting, remote thermostat
LED Light Kit
$675.00 – $1,175.00
A string of lights designed to fit to your specific shelter. Lights easily clip to existing d-rings and one plug controls the entire string.
EASY BREEZE Air Mover
12″ Fan $715.00
The fan is located outside the shelter and is connected to fabric ductwork that enters the side of the shelter and then runs the length of the shelter hugging the top. the ductwork has exhaust holes every 20″ to allow the ducted air to circulate throughout the shelter.
A heater or cooler can be attached to the systems fan.
The ductwork fabric is both FR and UV rated.
12″ System – recommended for Shelters 10′ x 20′ and larger has a sealed 120V motor which draws 4 amps and moves 2000 cu ft per minute
WATER LOG $325.00 each
Perfect way to secure your shelter on hard ground when there is light winds.
Seven feet long, multiple attaching points, handles to move easily, holds 200lbs of water.
Ground Stakes $160.00
Set of four (4) 1″ x 30″ steel ground stakes
Starting at $175.00
Internal dividers to create “private” areas within your shelter. Easily attached with velcro.
Starting at $165.00
On the shelter, banner tabs are on both sides as a standard feature.
LOGOS or lettering can be placed on the sides of the shelter to advertise your business. Why not make this both a work station and billboard for your business at the same time?
Pelsue Model 45k BTU 1590 one-piece Axial Propane Heater / Blower provides fresh, warm air. Indirect fired. Propane tank not included.
- 120 V
- 4 Amp
- 47 lbs
Flagro 85k BTU Propane Heater / Blower provides fresh, warm air.
Direct fired. Propane tank not included.
- 120 V
- 15 Amp
- 135 lbs
Welded steel frame, 325lb weight limit
32″w x 79″l x 17″h, 21lbs
Cooldraft Misting Fan $825.00
18″ High Velocity fan with four positions and three speeds
Designed to cool 400-600 sq ft
Water required for operation
- 110 V
- 3.4 Amp
- 34 lbs
- 33″ H x 24″W x 18″D with fan in cooler
FREE when ordered at time of purchase
The Van Connector allows your FAST Shelter to attach directly to your trailer or van so that there is a covered transit between your supplies and your work area.
PLASTIC STORAGE CONTAINER
SHELTER-TO-SHELTER ATTACHING KIT
$205.00 – $250.00
This kit provides a simple way to attach one shelter to another.
Modifications to the standard designs of our inflatable shelters are not a problem because we are the manufacturer. There may be an additional charge.
We will work with you so that you have the FAST Shelter that works best for your business. Just call and talk to us about your needs.
AirTite Shelter Photos
Set Up – AirTite
Make sure there is enough room for your FAST Shelter inflatable tent before you take it from your vehicle. Walk off about 30 feet in one direction and 15 feet in the other. And if it is a windy location, be sure to leave room to park a vehicle on the attached pads for better stability.
Call or email us with any questions.
Your FAST Shelter will come in a heavy duty canvas bag or hard-side container with tie up straps. Undo the straps, flip the bag or container on its side and roll out the shelter. Any flat surface will do.
The shelter is rolled so the doors are at either end. Unroll the shelter in the direction you would like the door to face. Spread the shelter out flat so that the black bottom is spread out tightly. It is a little easier to do with two people, but one can handle it.
Inflate shelter using only the supplied fan. The fan will inflate the shelter to the appropriate pressure without danger of over inflation.
Once inflated the shelter will need to be secured.
Check out Anchoring Your Shelter for the best ways to secure your shelter.